Title 29: Labor


PART 1910—OCCUPATIONAL SAFETY AND HEALTH STANDARDS


Subpart A—General
§ 1910.1   Purpose and scope.
§ 1910.2   Definitions.
§ 1910.3   Petitions for the issuance, amendment, or repeal of a standard.
§ 1910.4   Amendments to this part.
§ 1910.5   Applicability of standards.
§ 1910.6   Incorporation by reference.
§ 1910.7   Definition and requirements for a nationally recognized testing laboratory.
§ 1910.8   OMB control numbers under the Paperwork Reduction Act.

 

Subpart B—Adoption and Extension of Established Federal Standards

§ 1910.11   Scope and purpose.
§ 1910.12   Construction work.
§ 1910.15   Shipyard employment.
§ 1910.16   Longshoring and marine terminals.
§ 1910.17   Effective dates.
§ 1910.18   Changes in established Federal standards.
§ 1910.19   Special provisions for air contaminants.

 

Subpart C [Reserved]


 

Subpart D—Walking-Working Surfaces

§ 1910.21   Definitions.
§ 1910.22   General requirements.
§ 1910.23   Guarding floor and wall openings and holes.
§ 1910.24   Fixed industrial stairs.
§ 1910.25   Portable wood ladders.
§ 1910.26   Portable metal ladders.
§ 1910.27   Fixed ladders.
§ 1910.28   Safety requirements for scaffolding.
§ 1910.29   Manually propelled mobile ladder stands and scaffolds (towers).
§ 1910.30   Other working surfaces.

 

Subpart E—Means of Egress

§ 1910.33   Table of contents.
§ 1910.34   Coverage and definitions.
§ 1910.35   Compliance with NFPA 101–2000, Life Safety Code.
§ 1910.36   Design and construction requirements for exit routes.
§ 1910.37   Maintenance, safeguards, and operational features for exit routes.
§ 1910.38   Emergency action plans.
§ 1910.39   Fire prevention plans.
Appendix to Subpart E of Part 1910—Exit Routes, Emergency Action Plans, and Fire Prevention Plans


 

Subpart F—Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms

§ 1910.66   Powered platforms for building maintenance.
§ 1910.67   Vehicle-mounted elevating and rotating work platforms.
§ 1910.68   Manlifts.

 

Subpart G—Occupational Health and Environmental Control

§ 1910.94   Ventilation.
§ 1910.95   Occupational noise exposure.
§ 1910.97   Nonionizing radiation.
§ 1910.98   Effective dates.

 

Subpart H—Hazardous Materials

§ 1910.101   Compressed gases (general requirements).
§ 1910.102   Acetylene.
§ 1910.103   Hydrogen.
§ 1910.104   Oxygen.
§ 1910.105   Nitrous oxide.
§ 1910.106   Flammable and combustible liquids.
§ 1910.107   Spray finishing using flammable and combustible materials.
§ 1910.108   [Reserved]
§ 1910.109   Explosives and blasting agents.
§ 1910.110   Storage and handling of liquefied petroleum gases.
§ 1910.111   Storage and handling of anhydrous ammonia.
§§ 1910.112-1910.113   [Reserved]

§ 1910.119   Process safety management of highly hazardous chemicals.
§ 1910.120   Hazardous waste operations and emergency response.
§ 1910.121   [Reserved]

Dipping and Coating Operations
§ 1910.122   Table of contents.
§ 1910.123   Dipping and coating operations: Coverage and definitions.
§ 1910.124   General requirements for dipping and coating operations.
§ 1910.125   Additional requirements for dipping and coating operations that use flammable or combustible liquids.
§ 1910.126   Additional requirements for special dipping and coating operations.

 

Subpart I—Personal Protective Equipment

§ 1910.132   General requirements.
§ 1910.133   Eye and face protection.
§ 1910.134   Respiratory protection.
§ 1910.135   Head protection.
§ 1910.136   Foot protection.
§ 1910.137   Electrical protective equipment.
§ 1910.138   Hand protection.
Appendix A to Subpart I of Part 1910—References for Further Information (Non-mandatory)

Appendix B to Subpart I to Part 1910—Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection


 

Subpart J—General Environmental Controls

§ 1910.141   Sanitation.
§ 1910.142   Temporary labor camps.
§ 1910.143   Nonwater carriage disposal systems. [Reserved]
§ 1910.144   Safety color code for marking physical hazards.
§ 1910.145   Specifications for accident prevention signs and tags.
§ 1910.146   Permit-required confined spaces.
§ 1910.147   The control of hazardous energy (lockout/tagout).

 

Subpart K—Medical and First Aid

§ 1910.151   Medical services and first aid.
§ 1910.152   [Reserved]

 

Subpart L—Fire Protection

§ 1910.155   Scope, application and definitions applicable to this subpart.
§ 1910.156   Fire brigades.

Portable Fire Suppression Equipment
§ 1910.157   Portable fire extinguishers.
§ 1910.158   Standpipe and hose systems.

Fixed Fire Suppression Equipment
§ 1910.159   Automatic sprinkler systems.
§ 1910.160   Fixed extinguishing systems, general.
§ 1910.161   Fixed extinguishing systems, dry chemical.
§ 1910.162   Fixed extinguishing systems, gaseous agent.
§ 1910.163   Fixed extinguishing systems, water spray and foam.

Other Fire Protection Systems
§ 1910.164   Fire detection systems.
§ 1910.165   Employee alarm systems.
Appendices to Subpart L of Part 1910—Note

Appendix A to Subpart L of Part 1910—Fire Protection

Appendix B to Subpart L of Part 1910—National Consensus Standards

Appendix C to Subpart L of Part 1910—Fire Protection References For Further Information

Appendix D to Subpart L of Part 1910—Availability of Publications Incorporated by Reference in Section 1910.156 Fire Brigades

Appendix E to Subpart L of Part 1910—Test Methods for Protective Clothing


 

Subpart M—Compressed Gas and Compressed Air Equipment

§§ 1910.166-1910.168   [Reserved]

§ 1910.169   Air receivers.

 

Subpart N—Materials Handling and Storage

§ 1910.176   Handling materials—general.
§ 1910.177   Servicing multi-piece and single piece rim wheels.
§ 1910.178   Powered industrial trucks.
§ 1910.179   Overhead and gantry cranes.
§ 1910.180   Crawler locomotive and truck cranes.
§ 1910.181   Derricks.
§ 1910.183   Helicopters.
§ 1910.184   Slings.

 

Subpart O—Machinery and Machine Guarding

§ 1910.211   Definitions.
§ 1910.212   General requirements for all machines.
§ 1910.213   Woodworking machinery requirements.
§ 1910.214   Cooperage machinery. [Reserved]
§ 1910.215   Abrasive wheel machinery.
§ 1910.216   Mills and calenders in the rubber and plastics industries.
§ 1910.217   Mechanical power presses.
§ 1910.218   Forging machines.
§ 1910.219   Mechanical power-transmission apparatus.

 

Subpart P—Hand and Portable Powered Tools and Other Hand-Held Equipment

§ 1910.241   Definitions.
§ 1910.242   Hand and portable powered tools and equipment, general.
§ 1910.243   Guarding of portable powered tools.
§ 1910.244   Other portable tools and equipment.

 

Subpart Q—Welding, Cutting and Brazing

§ 1910.251   Definitions.
§ 1910.252   General requirements.
§ 1910.253   Oxygen-fuel gas welding and cutting.
§ 1910.254   Arc welding and cutting.
§ 1910.255   Resistance welding.

 

Subpart R—Special Industries

§ 1910.261   Pulp, paper, and paperboard mills.
§ 1910.262   Textiles.
§ 1910.263   Bakery equipment.
§ 1910.264   Laundry machinery and operations.
§ 1910.265   Sawmills.
§ 1910.266   Logging operations.
§ 1910.268   Telecommunications.
§ 1910.269   Electric power generation, transmission, and distribution.
§ 1910.272   Grain handling facilities.

 

Subpart S—Electrical


General
§ 1910.301   Introduction.

Design Safety Standards for Electrical Systems
§ 1910.302   Electric utilization systems.
§ 1910.303   General requirements.
§ 1910.304   Wiring design and protection.
§ 1910.305   Wiring methods, components, and equipment for general use.
§ 1910.306   Specific purpose equipment and installations.
§ 1910.307   Hazardous (classified) locations.
§ 1910.308   Special systems.
§§ 1910.309-1910.330   [Reserved]


Safety-Related Work Practices
§ 1910.331   Scope.
§ 1910.332   Training.
§ 1910.333   Selection and use of work practices.
§ 1910.334   Use of equipment.
§ 1910.335   Safeguards for personnel protection.
§§ 1910.336-1910.360   [Reserved]


Safety-Related Maintenance Requirements
§§ 1910.361-1910.380   [Reserved]


Safety Requirements for Special Equipment
§§ 1910.381-1910.398   [Reserved]


Definitions
§ 1910.399   Definitions applicable to this subpart.
Appendix A to Subpart S of Part 1910—Reference Documents

Appendix B to Subpart S of Part 1910—Explanatory Data [Reserved]

Appendix C to Subpart S of Part 1910—Tables, Notes, and Charts [Reserved]


 

Subpart T—Commercial Diving Operations


General
§ 1910.401   Scope and application.
§ 1910.402   Definitions.

Personnel Requirements
§ 1910.410   Qualifications of dive team.

General Operations Procedures
§ 1910.420   Safe practices manual.
§ 1910.421   Pre-dive procedures.
§ 1910.422   Procedures during dive.
§ 1910.423   Post-dive procedures.

Specific Operations Procedures
§ 1910.424   SCUBA diving.
§ 1910.425   Surface-supplied air diving.
§ 1910.426   Mixed-gas diving.
§ 1910.427   Liveboating.

Equipment Procedures and Requirements
§ 1910.430   Equipment.

Recordkeeping
§ 1910.440   Recordkeeping requirements.
Appendix A to Subpart T to Part 1910—Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions

Appendix B to Subpart T to Part 1910—Guidelines for Scientific Diving

Appendix C to Subpart T to Part 1910—Alternative Conditions Under §1910.401(a)(3) for Recreational Diving Instructors and Diving Guides (Mandatory)


Subparts U–Y [Reserved]

§§ 1910.901-1910.999   [Reserved]


Source:   39 FR 23502, June 27, 1974, unless otherwise noted.

 

Authority:   Sections 4, 6, and 8 of the Occupational Safety and Health Act of 1970 (29 U.S.C. 653, 655, and 657); Secretary of Labor's Order No. 12–71 (36 FR 8754), 8–76 (41 FR 25059), 9–83 (48 FR 35736), 1–90 (55 FR 9033), 6–96 (62 FR 111), 3–2000 (65 FR 50017), and 5–2002 (67 FR 65008), as applicable.

Sections 1910.7 and 1910.8 also issued under 29 CFR part 1911. Section 1910.7(f) also issued under 31 U.S.C. 9701, 29 U.S.C. 9 a, 5 U.S.C. 553; Public Law 106–113 (113 Stat. 1501A–222); and OMB Circular A–25 (dated July 8, 1993) (58 FR 38142, July 15, 1993).